Skip links

Signing a Master Services Agreement with a Major Customer: The Clauses Maryland Businesses Must Negotiate

A large customer's master services agreement is written to protect the customer. Here are the clauses Maryland service businesses must negotiate, from indemnity and liability caps to IP ownership and payment terms.
Signing a Master Services Agreement with a Major Customer: The Clauses Maryland Businesses Must Negotiate

Maryland Business Contracts • Negotiating Customer Agreements

Signing a Master Services Agreement with a Major Customer: The Clauses Maryland Businesses Must Negotiate

Last updated: November 12, 2026 Author: Yawar B. Iqbal Firm: Iqbal Business Law (Thurmont & Rockville, MD • Serving MD & PA)

Key Points

  • A master services agreement drafted by a large customer is written to protect the customer. Signing it unreviewed can put the entire value of the relationship, and sometimes far more, at risk.
  • The clauses that matter most are indemnification, limitation of liability, intellectual property ownership, payment and set-off, termination, insurance, and data security.
  • Maryland courts generally enforce the contract as written. A clause that seems like boilerplate during negotiation is often the clause that decides a later dispute.
  • Maryland law places some limits on one-sided terms. Certain construction indemnities for the other party’s sole negligence are void, and exculpatory clauses cannot excuse intentional harm or gross negligence.
  • Unless the contract says otherwise, a customer that pays an independent contractor for software or other custom work does not automatically own the copyright. Ownership terms should be negotiated deliberately, including what your business keeps.
  • Subcontractors to government primes may inherit federal clauses they never saw. Know what is being flowed down before signing.
  • Large customers negotiate more than vendors expect, particularly on caps, indemnity scope, payment terms, and cure periods. Learn more about our contract negotiation and drafting services.

Why the customer’s paper deserves a careful review

The contract outlasts the relationship that produced it

Landing a large customer is often a turning point for a Maryland service business: an IT or cybersecurity firm signing with a federal prime, a staffing company signing with a health system, a consulting or marketing firm signing with a national brand. The customer’s procurement or legal department sends its standard master services agreement, usually with a note that it is “our standard form,” and the business is eager to start.

That form was written by the customer’s lawyers to protect the customer. It typically allocates most risk to the vendor, gives the customer flexibility to pay slowly or terminate early, and claims broad ownership of the vendor’s work. None of that is improper; it is simply the customer’s opening position. The problem arises when the vendor treats the opening position as final.

Maryland courts generally interpret commercial contracts according to their plain language and enforce them as written. If the business later disputes an invoice, defends a third-party claim, or loses the customer, the outcome will usually turn on what the MSA says, not on what the parties discussed in the sales process. A review before signing is the least expensive point at which to change that outcome.

The core question. For every risk-shifting clause, ask: if this goes wrong, how much could it cost us, and is that exposure proportionate to what we will earn under this contract? A $200,000 engagement should not carry uncapped liability for the customer’s own losses.

How the MSA, SOWs, and purchase orders fit together

Know which document controls before the work begins

A master services agreement sets the legal terms for a relationship that will involve many projects. The specific work, price, schedule, and deliverables are usually set out in separate statements of work (SOWs), task orders, or purchase orders issued under the MSA.

  • Order of precedence. Most MSAs include a clause stating which document controls when they conflict. Customers often make the MSA control over every SOW, which means a negotiated SOW term can be overridden by contrary MSA language. If a particular project needs different terms, the precedence clause should allow an SOW to override the MSA when it expressly says so.
  • Purchase order terms. Many large customers issue purchase orders with their own preprinted terms. The MSA should state that those terms have no effect, or the vendor may find itself bound by conditions it never negotiated.
  • Vendor terms and click-through agreements. The reverse is also true. Vendor quotes, invoices, and online terms of service usually will not control if the MSA says it is the entire agreement.
  • Change orders. The MSA should require written change orders for added scope, with pricing adjustments. Without them, scope creep becomes unpaid work, and disputes over what was included become disputes over what was owed.
  • Acceptance criteria in the SOW. The SOW should define deliverables and acceptance criteria precisely enough that both sides can tell when the work is done. Vague deliverables are a leading cause of payment disputes.

Because each SOW sits under the MSA, a vendor that accepts a one-sided MSA is accepting those terms for every future project with that customer. That multiplier is a reason to negotiate the MSA carefully even when the first SOW is small.

Indemnification

Who pays when a third party sues

An indemnification clause requires one party to cover the other’s losses from specified claims, most often claims brought by third parties. In a customer-drafted MSA, the indemnity typically runs only one way: from the vendor to the customer.

What to look for

  • Scope of the trigger. Compare “claims arising from the vendor’s negligence or willful misconduct” with “any claims arising out of or relating to this agreement or the services.” The second version can make the vendor responsible for claims that have little to do with its own fault.
  • The duty to defend. A promise to “defend, indemnify, and hold harmless” obligates the vendor to pay for the customer’s lawyers from the start of a covered claim, not just to reimburse a final judgment. Defense costs alone can exceed the contract’s value.
  • First-party losses. Some indemnities are drafted to cover the customer’s own direct losses, not just third-party claims. That turns the indemnity into an end run around the limitation of liability.
  • Control of the defense. The indemnifying party should have the right to control the defense and settlement of a claim it is paying for, with prompt notice and reasonable cooperation from the other side.
  • Intellectual property infringement. Customers commonly ask the vendor to indemnify against claims that the vendor’s work infringes a third party’s rights. That request is reasonable, but it should exclude infringement caused by customer materials, customer modifications, or combinations the vendor did not provide.
  • Mutuality. The customer should indemnify the vendor for claims arising from the customer’s own materials, data, instructions, and conduct.

Indemnity for the customer’s own negligence

Maryland courts do not lightly read an indemnity to cover the indemnified party’s own negligence. In Crockett v. Crothers, 264 Md. 222 (1972), the Court of Appeals of Maryland stated the rule that contracts will not be construed to indemnify a person against his own negligence unless an intention to do so is expressed in those very words or in other unequivocal terms. Customers’ lawyers know this rule, which is why well-drafted customer forms often state expressly that the indemnity applies “regardless of whether the indemnified party is partially at fault.” That language deserves close attention.

Construction-related contracts

Maryland goes further for construction-related work. Under Courts and Judicial Proceedings Section 5-401(a), a provision in a contract relating to the construction, alteration, repair, or maintenance of a building or structure, or to related architectural, engineering, inspecting, or surveying services, that requires indemnification for bodily injury or property damage caused by or resulting from the sole negligence of the promisee or its agents or employees is against public policy and void. The statute also voids provisions requiring the promisor to defend the promisee, or to pay its defense costs, for that sole-negligence liability. Insurance contracts and certain surety agreements are excluded.

The statute is narrower than many vendors assume. It addresses the promisee’s sole negligence, and it applies to construction-related contracts, not to ordinary IT, consulting, or staffing agreements. For most service MSAs, the protection has to come from negotiation. See our Maryland construction contractor legal guide for more on construction contracts.

Limitation of liability

Caps, consequential damages, and the carve-outs that swallow them

The limitation of liability clause sets the maximum each party can recover from the other. For a service business, it is often the single most important clause in the agreement, because it determines whether a failed project can threaten the company itself.

The three moving parts

  • The cap. A common structure limits each party’s total liability to the fees paid or payable under the agreement, or under the relevant SOW, during the preceding twelve months. Customer forms sometimes omit a cap entirely, cap only the customer’s liability, or set the vendor’s cap at a multiple of fees.
  • The consequential damages exclusion. Most MSAs exclude indirect, incidental, special, and consequential damages, including lost profits. Whether that exclusion is mutual matters. A customer that suffers a business interruption can claim large lost profits; a vendor’s main damages are usually unpaid fees, which are direct damages either way.
  • The carve-outs. Customer drafts typically carve certain obligations out of both the cap and the exclusion: indemnification, breaches of confidentiality, data security breaches, intellectual property infringement, and gross negligence or willful misconduct. Each carve-out is reasonable on its own terms. Taken together, they can leave the vendor with uncapped exposure for exactly the claims most likely to be large.

Negotiating the carve-outs

A practical middle ground is a “super-cap”: a separate, higher cap for specified categories, such as data breaches or confidentiality breaches, often set at a multiple of annual fees or tied to available insurance limits. That gives the customer meaningful protection without making the vendor the insurer of the customer’s entire business. It is also worth confirming that unpaid fees owed to the vendor are excluded from the cap on the customer’s liability, so the cap never limits the customer’s obligation to pay for work performed.

What Maryland law will and will not enforce

Maryland courts generally enforce negotiated limitations between commercial parties. In Wolf v. Ford, 335 Md. 525 (1994), the Court of Appeals held that, in the absence of legislation to the contrary, exculpatory clauses are generally valid, subject to important exceptions: a party will not be permitted to excuse its liability for intentional harms or for the more extreme forms of negligence, such as reckless, wanton, or gross negligence; the contract cannot be the product of grossly unequal bargaining power; and public policy will not permit exculpatory agreements in transactions affecting the public interest.

For a vendor, the lesson cuts both ways. A cap is likely to be enforced in an ordinary negligence or breach case between two businesses, so it is worth negotiating carefully. But a vendor should not assume the cap will protect against claims of gross negligence or intentional misconduct, and customers frequently carve those claims out expressly in any event.

Who owns the work

Work made for hire, assignments, and protecting what you already own

Customer-drafted MSAs usually state that everything the vendor creates under the agreement is a “work made for hire” owned by the customer, and that the vendor assigns all rights in any deliverables to the customer. For a vendor whose value lies in its methods, code libraries, templates, and know-how, this clause can transfer far more than the customer needs.

Why “work made for hire” language is not enough by itself

Under the federal Copyright Act, 17 U.S.C. Section 101 defines a work made for hire as either a work prepared by an employee within the scope of employment, or a specially ordered or commissioned work that falls within one of nine listed categories, such as a contribution to a collective work, a part of an audiovisual work, a translation, a compilation, or an instructional text, if the parties expressly agree in a signed writing that it will be a work made for hire. Software and many other commercial deliverables created by an independent contractor do not fit neatly into those categories.

That is why customers pair work-for-hire language with an assignment. Under 17 U.S.C. Section 204(a), a transfer of copyright ownership is not valid unless it is in writing and signed by the owner of the rights conveyed or its authorized agent. The MSA is that writing, so the assignment clause will do exactly what it says.

What the vendor should protect

  • Pre-existing materials. The vendor should retain ownership of anything it owned or developed before the agreement, or develops independently outside it, often called “background IP” or “vendor materials.”
  • General tools and know-how. Reusable code, frameworks, templates, processes, and general skills and knowledge should remain the vendor’s, so it can continue serving other customers.
  • A license instead of ownership. Where a deliverable incorporates vendor materials, the customer can receive a perpetual, nonexclusive license to use them as part of the deliverable, rather than ownership.
  • Assignment on payment. Ownership of customer-specific deliverables can be conditioned on full payment, which gives the vendor leverage if invoices go unpaid.
  • Your own subcontractors and employees. A vendor that promises to assign all rights must first own them. Confirm that employee and contractor agreements assign their work to your business. See our guide on independent contractor classification in Maryland.

Confidential methods and processes may also qualify as trade secrets. Our article on trade secret misappropriation in Maryland explains how to protect them.

Payment, acceptance, and set-off

Getting paid on time for work actually performed

Large customers often impose payment terms that strain a smaller vendor’s cash flow. The MSA is the place to address that, before the first invoice.

  • Payment period. Net 60 or net 90 terms are common in customer forms. A vendor carrying payroll for staff assigned to the customer may need shorter terms, deposits, or milestone billing.
  • Pay-when-paid and pay-if-paid. Subcontracts under a prime contract often tie payment to the prime’s receipt of payment from the end customer. A “pay-when-paid” clause typically addresses the timing of payment, while a “pay-if-paid” clause attempts to make the end customer’s payment a condition of the subcontractor’s right to be paid. But labels are not controlling. In Patriot Construction, LLC v. VK Electrical Services, LLC, 257 Md. App. 245 (2023), the Appellate Court of Maryland enforced a provision labeled “pay-when-paid” that expressly made the prime contractor’s receipt of payment a condition precedent to its payment obligation. Subcontractors should examine whether the clause merely delays payment or shifts the risk of nonpayment, and negotiate those terms before beginning work.
  • Invoice disputes. Many forms let the customer withhold payment on any disputed invoice. The vendor should ask that the customer pay undisputed amounts on time, identify disputed amounts in writing with reasons within a short period, and work to resolve them promptly.
  • Set-off. A set-off clause allows the customer to deduct amounts it claims the vendor owes, including amounts under other contracts, from current invoices. Broad set-off rights let the customer resolve disputes in its own favor simply by withholding payment.
  • Acceptance. If payment depends on acceptance of deliverables, the MSA should define objective acceptance criteria, set a deadline for the customer to accept or reject with specific reasons, and treat silence or use in production as acceptance.
  • Late payment remedies. Interest on late payments and the right to suspend work after notice of nonpayment give the vendor practical leverage. Customer forms rarely include either.
  • Audit rights. Customers often reserve the right to audit vendor billing records. Reasonable audit rights are standard, but the clause should limit frequency, scope, and look-back period, and require the customer to bear audit costs unless a material overcharge is found.

If a customer stops paying despite these protections, our guide on collecting unpaid invoices in Maryland explains the next steps.

Termination and cure

How the relationship can end, and what happens next

Termination clauses decide who can walk away, how quickly, and at what cost. Many vendor disputes begin with a termination notice.

  • Termination for convenience. Customer forms commonly allow the customer to terminate at any time, for any reason, on short notice. If the vendor has hired staff, bought equipment, or declined other work to serve the customer, it should ask for a longer notice period, payment for all work performed through termination, reimbursement of non-cancellable commitments, and in some cases a termination fee. Mutuality is also worth requesting.
  • Termination for cause and cure periods. The MSA should require written notice describing the alleged breach and a reasonable opportunity to cure, often 30 days, before the customer may terminate for cause. Without a cure period, a minor or disputed performance issue can become grounds for immediate termination.
  • Vendor termination rights. The vendor should have a right to terminate or suspend for the customer’s nonpayment after notice and a cure period.
  • Transition assistance. Customers often require the vendor to continue services and assist with transition to a new provider after termination. Transition work should be paid at the agreement’s rates.
  • Survival. Confidentiality, payment obligations, indemnification, limitation of liability, and dispute resolution provisions should survive termination. Confirm that the limitation of liability survives along with the indemnity.

Disputes over whether a party properly gave notice and an opportunity to cure are among the most common contract disputes we see. Our article on breach of contract in Maryland and Pennsylvania covers what happens when the relationship breaks down.

Insurance requirements

Match the contract to the coverage you actually have

Most MSAs require the vendor to carry specified insurance, such as commercial general liability, professional liability (errors and omissions), cyber liability, workers’ compensation, and automobile coverage, at stated limits. Customers also commonly require that they be named as additional insureds and that the vendor’s insurers waive subrogation rights.

  • Check before signing. Send the insurance section to your broker before the agreement is signed. Required limits, additional insured status, primary and noncontributory language, and waiver of subrogation may require policy endorsements or added premium.
  • Coordinate with indemnity. Many policies exclude liability assumed under contract, subject to exceptions. A broad indemnity the vendor’s insurance does not cover is an uninsured risk.
  • Notice of cancellation. Customer forms sometimes require the vendor to guarantee advance notice of cancellation from the insurer, which insurers may not provide. The vendor can usually agree to give notice itself instead.

Confidentiality and data security

Obligations that often carry the highest exposure

If the vendor will access the customer’s systems or handle personal information about the customer’s employees, patients, or customers, the MSA will likely include detailed security requirements, breach notification duties, and sometimes a separate data processing agreement.

Maryland requirements that shape these clauses

  • Vendor contracts must require reasonable security. Under Commercial Law Section 14-3503(b), a business that uses a nonaffiliated third party as a service provider and discloses personal information about a Maryland resident under a written contract must require by contract that the provider implement and maintain reasonable security procedures and practices appropriate to the nature of the information disclosed. Customers subject to that rule will insist on security terms.
  • Breach notice to the data owner. Under Commercial Law Section 14-3504(c), a business that maintains computerized data including personal information about a Maryland resident that it does not own or license must notify the owner or licensee of a qualifying security breach as soon as reasonably practicable, but generally no later than 10 days after discovering or being notified of the breach. Section 14-3504(d) permits delayed notification in certain circumstances, including specified law enforcement concerns and activities necessary to determine the breach’s scope or restore system integrity. The business must also share information relating to the breach with the owner or licensee. Customer MSAs may impose shorter contractual deadlines, such as 24 or 72 hours, which should be evaluated alongside the statutory requirements.
  • Maryland’s newer consumer privacy requirements. The Maryland Online Data Privacy Act (MODPA), effective October 1, 2025, imposes additional requirements on businesses that fall within its scope. Under Commercial Law Section 14-4708, covered controllers and processors must enter into contracts specifying the nature, purpose, and duration of personal data processing, the types of data involved, and the parties’ respective rights and obligations. These agreements must also address confidentiality, reasonable security safeguards, data return or deletion, subcontractor obligations, and compliance assessments. Vendors handling consumer personal data should determine whether MODPA applies to the relationship and whether a separate data processing agreement is necessary.

What to negotiate

  • Security standards that match what the vendor actually does, rather than a list of certifications it does not hold
  • Notification deadlines that are achievable, clearly distinguish suspected security incidents from confirmed breaches, and comply with applicable law. Maryland law generally requires a service provider maintaining covered personal information it does not own or license to notify the data owner or licensee as soon as reasonably practicable, and no later than 10 days after discovering or being notified of a qualifying breach, subject to statutory exceptions. Contractual notification requirements should account for these obligations without requiring immediate reporting of every unsubstantiated security alert.
  • Reimbursement obligations limited to reasonable, documented costs of required notifications and remediation, within an agreed super-cap
  • Confidentiality obligations that are mutual, exclude information that is public or independently developed, and permit disclosure when legally required
  • A defined period for confidentiality obligations, with longer protection for trade secrets

Health care, financial services, and government work bring additional federal requirements, such as HIPAA business associate agreements or federal cybersecurity clauses, which should be reviewed alongside the MSA.

Non-solicitation and personnel clauses

Protecting your team and controlling who does the work

Service businesses live or die by their people. Two types of clauses address personnel.

  • Non-solicitation. Vendors placing staff on site with a customer should ask the customer not to solicit or hire those staff during the engagement and for a period afterward, or to pay a placement fee if it does. Customers often ask for the same protection in reverse. A narrowly drawn, mutual clause limited to people who actually worked on the engagement is easier to defend than a broad no-hire clause, which can raise its own enforceability concerns.
  • Key personnel and staffing control. Customer forms may require named key personnel, customer approval of replacements, and the right to demand removal of any individual. The vendor should retain control over its own workforce, with reasonable cooperation on customer concerns.
  • Employment-related indemnities. Customers sometimes require the vendor to indemnify against claims that vendor personnel are the customer’s employees. The vendor should be prepared to show that it properly classifies, pays, and supervises its workers.

Non-solicitation clauses in business-to-business contracts are distinct from employee non-competes. For the employee side, see our guide on whether non-compete agreements are enforceable in Maryland.

Governing law, forum, and dispute clauses

Where and how a dispute will be decided

A national customer’s form usually chooses the law and courts of its home state. For a Maryland vendor, that can mean litigating a payment dispute in another state, under unfamiliar law, at much greater cost.

  • Forum selection. Maryland courts enforce forum selection clauses unless the resisting party shows they are unreasonable. In Gilman v. Wheat, First Securities, Inc., 345 Md. 361 (1997), the Court of Appeals adopted the federal standard that such clauses are presumptively valid and enforceable, and may be set aside only on a clear showing that enforcement would be unreasonable, such as where the clause was induced by fraud or overreaching, the chosen forum would effectively deprive the party of its day in court, or enforcement would violate a strong public policy. A vendor should assume the forum clause will be enforced and negotiate it accordingly.
  • Shortened limitations periods. Customer forms sometimes require claims to be brought within one year. Maryland’s general limitations period for contract claims is three years. In Ceccone v. Carroll Home Services, LLC, 454 Md. 680 (2017), the Court of Appeals held that a contractual provision shortening the limitations period is enforceable only if there is no statute to the contrary, the provision is not the product of fraud, duress, misrepresentation, or the like, and the provision is reasonable in light of the circumstances, considering factors such as the subject matter of the contract, the length of the shortened period, the relative bargaining power of the parties, and whether the shortened period applies to both parties. A one-sided shortened period applying only to the vendor’s claims is worth challenging during negotiation rather than litigating later. See our guide to the Maryland statute of limitations for business claims.
  • Arbitration. Some MSAs require arbitration. Arbitration can be faster and private, but it can also be expensive and limits appeals. Our article on arbitration vs. litigation for Maryland businesses explains the tradeoffs.
  • Escalation and attorneys’ fees. A requirement that executives meet before either side sues can resolve disputes cheaply. An attorneys’ fee clause, if included, should be mutual.

Subcontracts and government flow-downs

What a subcontractor inherits from the prime contract

Many Maryland service businesses, particularly along the I-270 corridor, work as subcontractors to federal prime contractors. Their subcontract agreements typically “flow down” clauses from the prime’s government contract, sometimes by listing clause numbers and sometimes by incorporating the entire prime contract by reference.

  • Mandatory flow-downs. Federal regulations require certain clauses to be included in subcontracts. For example, FAR 52.244-6, which governs subcontracts for commercial products and commercial services, lists clauses the prime contractor must insert in its subcontracts, several of which apply only above stated dollar thresholds or in other specified circumstances.
  • Discretionary flow-downs. Primes often flow down far more than the regulations require, including clauses that make little sense for the subcontractor’s role. Ask for a list of the specific clauses being flowed down and a mechanism for adapting them, rather than accepting incorporation of the entire prime contract.
  • Termination and payment alignment. If the government terminates the prime contract for convenience, the prime will usually terminate the subcontract as well. The subcontract should give the subcontractor rights to recover costs comparable to what the prime can recover from the government.
  • Cybersecurity and compliance. Government work frequently carries cybersecurity, reporting, and ethics obligations. A subcontractor should confirm it can actually comply before signing.

Government contracting is a specialized field. For subcontracts with significant federal requirements, the review should include an assessment of which obligations apply to the subcontractor’s specific work.

What is realistically negotiable

Where large customers usually move, and where they rarely do

Vendors often assume a large customer’s form is take-it-or-leave-it. In our experience, procurement and legal teams expect comments, and many have pre-approved fallback positions. The key is to prioritize and ask for changes that are commercially reasonable.

Clause Typical customer draft Reasonable vendor ask How often customers move
Limitation of liability No cap for vendor, or broad carve-outs Mutual cap tied to fees; super-cap for data breaches Often
Indemnification One-way, “arising out of or relating to” Fault-based trigger; mutual indemnity; control of defense Often
Cure period None, or very short Written notice and 30 days to cure Often
IP ownership Customer owns everything Vendor keeps background IP; license to customer Often
Payment terms Net 60 or 90; broad set-off Shorter terms; pay undisputed amounts; limit set-off Sometimes
Termination for convenience Customer only, short notice Longer notice; payment for work and commitments Sometimes
Insurance limits High limits, many endorsements Limits matched to the engagement and existing coverage Sometimes
Governing law and forum Customer’s home state Neutral forum or defendant’s home state Rarely
Mandatory government flow-downs Required by regulation Clarify which clauses apply to your work Rarely, by design

Bargaining leverage matters. A vendor with specialized expertise, a short timeline to deliver, or an existing relationship with the customer’s business team usually has more room than it realizes. Even when leverage is limited, a short list of focused requests on the cap, indemnity, cure period, and IP ownership is often accepted.

Common mistakes

Errors that turn a good customer into a costly dispute
  • Treating the MSA as a formality. The business team negotiates the price and scope while the legal terms go unread. The legal terms are what govern when the relationship goes wrong.
  • Reviewing only the first SOW. Every future project inherits the MSA’s terms.
  • Ignoring documents incorporated by reference. Supplier codes of conduct, security policies, and prime contracts referenced in the MSA are part of the deal.
  • Accepting uncapped indemnities. An indemnity carved out of the cap can expose the business to losses far exceeding its revenue from the customer.
  • Giving away background IP. A broad assignment can prevent the vendor from reusing its own tools for other customers.
  • Promising what cannot be delivered. Security certifications, service levels, breach notice deadlines, and insurance limits the business does not actually meet become breaches on day one.
  • Starting work before signing. Work performed without a signed agreement can leave payment, ownership, and liability terms uncertain, and weakens the vendor’s negotiating position.
  • Not tracking obligations after signing. Notice requirements, reporting duties, insurance renewals, and renewal dates should be calendared. See 8 common contract mistakes Maryland and Pennsylvania business owners make.

How Iqbal Business Law can help

We review and negotiate master services agreements, subcontracts, and customer contracts for Maryland and Pennsylvania service businesses, from technology and consulting firms to staffing companies and government subcontractors. Because our practice also handles business disputes, we draft and negotiate with a clear view of how these clauses play out when a relationship breaks down. Our work includes:

  • Prompt review of a customer’s MSA with a prioritized list of the terms that matter most
  • Proposed redlines and fallback positions the customer’s legal team is likely to accept
  • Negotiating directly with procurement and in-house counsel, or supporting your team behind the scenes
  • Statements of work, change orders, and subcontractor agreements that align with the MSA
  • Coordination with your insurance broker on coverage requirements
  • Representation in payment, termination, and performance disputes under existing agreements
  • Ongoing contract support as outside general counsel

The best time to contact us is when the customer sends its form, before your team signs or begins work. A focused review at that stage costs far less than a dispute later.

We serve companies throughout Maryland from our offices in Thurmont and Rockville, including clients in Rockville, Bethesda, Gaithersburg, Silver Spring, Frederick, Montgomery County, Frederick County, and the I-270 corridor, and we are licensed in Maryland and Pennsylvania.

Related reads and resources

Statutes, regulations, and cases

Related Iqbal Business Law insights

FAQ

Can a small business really negotiate a large customer’s MSA?

Usually, yes. Large customers’ legal and procurement teams expect comments and often have approved fallback positions on liability caps, indemnity scope, cure periods, and intellectual property. Focused, commercially reasonable requests are far more likely to be accepted than a complete rewrite.

What is the most important clause in a master services agreement?

For most service businesses, the limitation of liability, read together with the indemnification clause and the carve-outs from the cap. Those provisions decide how much the business can lose if a project goes wrong or a third party sues. Payment terms and intellectual property ownership are close behind.

Does Maryland enforce limitation of liability clauses?

Generally, yes, between commercial parties. In Wolf v. Ford, 335 Md. 525 (1994), the Court of Appeals held that exculpatory clauses are generally valid in the absence of legislation to the contrary, but will not excuse liability for intentional harms or for reckless, wanton, or gross negligence, and will not be enforced where the contract is the product of grossly unequal bargaining power or the transaction affects the public interest.

Will my customer own everything we create under the MSA?

It depends on the contract. A customer that hires an independent contractor does not automatically own the copyright in most commissioned work. Ownership usually transfers through a signed written assignment under 17 U.S.C. Section 204(a), which customer MSAs typically include. The vendor should negotiate to keep its pre-existing materials and general tools, granting the customer a license where needed.

Can a customer require us to indemnify it for its own negligence?

In most service contracts, the parties can agree to that, but Maryland courts will not read an indemnity to cover the indemnified party’s own negligence unless the contract says so in those very words or in other unequivocal terms. In construction-related contracts, Courts and Judicial Proceedings Section 5-401 voids indemnity provisions for bodily injury or property damage caused by the promisee’s sole negligence.

Is a clause requiring us to sue within one year enforceable?

It may be. Under Ceccone v. Carroll Home Services, LLC, 454 Md. 680 (2017), a contractual provision shortening the limitations period is enforceable only if no statute prohibits it, it is not the product of fraud, duress, or misrepresentation, and it is reasonable in light of the circumstances, including the parties’ relative bargaining power and whether the shortened period applies to both sides.

What happens if we start work before the MSA is signed?

The parties may disagree about which terms govern, including price, payment timing, ownership of the work, and liability. Starting work also reduces the vendor’s leverage to negotiate. If work must begin early, a short signed interim agreement or letter covering payment, ownership, and liability is far better than nothing.

What should a subcontractor look for in a prime contractor’s subcontract?

Identify every clause flowed down from the prime contract, confirm which ones actually apply to your work, and make sure payment, termination, and dispute provisions are fair if the government changes or ends the prime contract. Provisions conditioning payment on the prime’s receipt of payment, whatever their label, broad incorporation of the prime contract, and cybersecurity obligations deserve particular attention.

How much does it cost to have a lawyer review an MSA?

The cost depends on the length of the agreement, the number of related documents, and how much negotiation follows. A focused review that identifies and prioritizes the key risks is typically a modest investment relative to the value of the contract. Contact us to discuss the scope of your agreement.

Yawar B. Iqbal is a Maryland and Pennsylvania business and tax attorney and the founder of Iqbal Business Law. He represents business owners and companies in commercial contracts, business disputes, acquisitions and sales of operating businesses, formation and corporate governance matters, IRS and Maryland tax controversies and criminal tax matters, and franchisee representation.

Disclaimer: This post is for general informational and educational purposes only and does not constitute legal advice. The statutes, regulations, and cases described here are current as of the date of this post and may change, and the right approach to any contract depends on its terms, the parties’ bargaining positions, the industry, and the specific circumstances. Reading this post does not create an attorney-client relationship with Iqbal Business Law. Before signing a master services agreement, subcontract, or other significant customer contract, consult a qualified attorney.